How To Remove Cartridge From Moen Sink Faucet

Inside the body of the cartridge there is a stem that moves up and down for shut off flow volume and rotates for hot cold mix.

How to remove cartridge from moen sink faucet.

Using a philips screwdriver unscrew the handle screw. Drop the hardwood dowel into the cartridge shell 2. Use an adjustable wrench to grab the tool and twist the cartridge back and forth until it works loose. This happens once in a blue moon but can b.

Pulling up on the stem is supposed to pull out the cartridge. In the best of circumstances you then. Remove the tap wrench. The removal tool just deforms.

As you thread the tap wrench back down into the cartridge shell 2 it will hit the dowel forcing it to the bottom causing the cartridge shell 2 to reverse out. Small flathead screwdriver remove the clip to replace a faulty faucet cartridge. Cut a 3 8 hardwood dowel 1 3 4 long. If you re not quite sure we d recommend that you refer to the original documentation that came with your faucet or feel free to.

After using several wrenches to remove this cartridge i finally got a vice grip and was able to remove the cartridge. If your moen faucet was manufactured after 2009 and you are looking at the 1225 cartridge it is possible that you may actually have a 1255 cartridge because cartridge styles can vary by the date of manufacture. Remove the washer from the cartridge and use pliers to remove the retaining clip. A stuck moen cartridge is a sure sign that the clip is still securing the cartridge to the cartridge body.

Re thread the tap wrench into the cartridge shell 2. Cartridge identification and installation help. Slide the white cartridge removal tool that came with your new cartridge over the old cartridge the tool acts a socket for the cartridge so you can use a wrench to remove it. Cartridge removal procedure the usual procedure for removing a cartridge is to unscrew the handle and after turning off the water pull out a retaining clip.

Pull the handle off from the faucet and pull the limit stop off. When replacing the moen cartridge on your sink or shower faucet you will need to first remove the retaining clip.